Navigation bar
|
Navigation bar |
When Simply Fastening |
APM'S SEELSKREWS® are designed to seal out air, water, lubricants and other liquied or gaseous contaminants. SEELSKREWS® are available in may standard thread sizes and with optional sealing materials. They can also be supplied with NYLOK®, a black anodized finish, or in a captivated (KAPTO_SKREW®) configuration
 |
 |
| Pan Head -
Slotted |
Pan Head -
Phillips (Meets requirements of MS 3312 & MS3213) |
|
|
| Metric Pan Head -
Slotted |
Metric Pan Head - Phillips |
|
 |
| Oversized Pan Head -
Slotted |
Recessed Head - Phillips |
| SPECIFICATIONS | |
|---|---|
| Material:
Non-magnetic stainless steel (passivated). Other materials available on request. Silicone rubber per ZZ-R-765, Class I & II, Grade 70. Other seal materials available. Temperature Range: -160 F to +500'F (-106°C to +260°C). Pressure Range: Up to 6000 psi,internal and external, subject to clearance hole dimensions. Check factory for test data. Shelf Life: Excess of 25 years |
Resistant to: Salt water. weather, dirt, dust, sunlight, ozone and most acid Agency Listings: UL and CSA. Installation: Install in same manner as standard fasteners. Standard break-edge practices for deburring (i.e. break-sharp edges of 0.005 maximum) are permissible. Recommended clearance hole depth is 2 to 3 times thread pitch. Minimum Thread Length: For machine screws up to 1 1/4" long, the complete thread should extend to within two threads (or closer) of the bearing surface of the head |